Phones answered 24/7Staunton, VA 24401
Call (833) 751-2102
(833) 751-2102
Serving Staunton city

Shingle Roof Replacement in Staunton, VA

A new asphalt shingle roof on a Staunton house, with the underlayment, the eave barrier and the nail pattern specified up front.

Call (833) 751-2102Free estimate
  • Repairs and full replacements
  • Ice at the eaves, wind and hail damage
  • Historic-district, metal and slate roofs

Get a fast quote

Fastest: call (833) 751-2102. Or send this and we call you back.

By sending this form you agree that Staunton Roofing may call or text you at the number provided about this request. Consent is not a condition of purchase. Message and data rates may apply. See our Privacy Policy.

Shingle Replacement

Shingle Roof Replacement: what it covers

Quick answer

Shingle roof replacement installs a new covering of asphalt shingles over a prepared deck, with underlayment and metal at every joint. Asphalt is the common covering in general, and its suitability for a particular house depends on the pitch, the decking and the eave ice barrier. Staunton Roofing connects callers with a local technician, and the price is confirmed on site.

Shingle Roof Replacement illustration for Staunton, VA

Asphalt shingles are the covering most homeowners ask about first, and for good reason: they are made in many profiles, they fit a wide range of pitches, and any crew can install them to a manufacturer's written pattern. What they cannot do is compensate for a weak deck or a poor eave, so the choice of shingle comes after the structure has been checked.

In Staunton the eave is the place to watch. Snow followed by ice can back water up under the lowest courses, and the underlayment and ice barrier at the eaves decide whether that water stays out. A shingle with a good label on the wrapper does not help a roof whose eave was left bare.

This page explains how the shingle is picked, what goes beneath it, and what to ask before a crew is booked. It does not claim how common any one covering is on Staunton houses, because that share was not sourced, and it does not quote a product life, because no figure for this valley was confirmed.

Service area
Staunton & Staunton city
Availability
Phones answered 24/7

How do I choose between shingle profiles for a Staunton house?

Choose the profile that fits the roof's pitch, the look of the house and the exposure to wind. A flat-profile shingle suits simple roofs, and a laminated shingle hides more surface wear. Ask the technician to show samples on the actual roof, since colour under a sloped sky reads differently from a sample card.

The pitch matters because a low slope sheds water more slowly and needs a more complete underlayment. A steep slope drains quickly but puts more weight and more wind load on each tab, so the nail schedule must be followed exactly.

Weight is a practical limit as well. A heavier shingle needs a deck that can carry it, and the decking check comes before the shingle choice is final.

What goes under the shingles at the eave?

Underlayment and an eave ice barrier sit beneath the shingles, and a metal drip edge covers the outer edge of the deck. Together they stop water that is driven or backed up by snow and ice from reaching the sheathing. The exact extent of the barrier is set by the code and the building office, not by the shingle maker.

Virginia's statewide code calls for an ice barrier where its design table records a history of ice at the eaves. Whether Staunton or Augusta County has made that designation was not confirmed, so the question goes to the building office before the scope is priced.

A barrier is only useful if it is laid in a continuous strip and lapped correctly under the courses above. A crew that lays it in patches leaves gaps that water will find.

Does the permit question change for a shingle job?

It can. Reshingling is handled differently from work that replaces the decking, and the rules for each are set by the city or county building office that covers the address. Those offices were not confirmed for re-roof rules on this page, so ask before the first course is nailed.

Harrisonburg's roofing application is a building permit and asks whether the old roof will be removed. Staunton, Waynesboro and the county each keep their own office, so the same question should be asked there rather than assumed from another town.

Get the answer in writing with the scope. A shingle job that later needs decking work is far easier to handle when the permit question was settled at the start.

Warning signs

Signs you need shingle roof replacement

Shingle installation is done from roof jacks and a ladder with fall protection, not by a homeowner on a steep slope. Keep children and pets clear of the drop zone below the eave, since stripped material and nails fall during the work.

  • Shingles that have lost their granules across a whole slope rather than in one patch
  • Tabs that curl upward at the bottom edge and stay curled after a dry spell
  • Cracks running across the tabs, close to the nail line
  • Ridge shingles that have split or flattened where the cap meets the slope
  • Sealant that has dried to a powder and no longer holds the tabs down
  • A roof that has been reshingled once already, with the new layer lifting at the edges
Our process

How our shingle roof replacement visit works

  1. Choose the shingle after the deck is checked

    The decking is inspected first, because a new shingle on soft boards fails early. The pitch, the exposure and the existing roof then narrow the profile and the weight class to offer.

  2. Specify the underlayment and the eave barrier

    The underlayment is chosen for the pitch, and an ice barrier is laid at the eaves where the state code calls for one or where the building office asks for it. Those details go into the written scope.

  3. Set the starter and the drip edge

    A starter strip at the eave and metal drip edge along the rakes give the first course a firm base, and they keep wind from lifting the outer edge of the roof.

  4. Nail the shingles to the product's pattern

    The courses are laid to the nail count and placement printed for that product. Staggered joints and a straight chalk line keep the roof square, and a crew that skips a pattern departs from the manufacturer's instructions.

  5. Finish the ridge and vent and inspect the result

    Ridge caps and any ridge vent are fitted, and the finished roof is walked for raised nails, exposed sealant and sheets that do not lie flat before the crew packs up.

Options

Types and options for shingle roof replacement

Single-layer shingles

A flat-profile shingle that suits a simple gable or hip roof. It is the easiest to match on a later repair.

Laminated shingles

A thicker, layered shingle with a textured shadow line. It hides more surface wear and reads closer to a slate or wood profile, at a higher weight per square.

Shingles over a new deck

Where boards are replaced, the new decking is inspected before any shingle goes on, and the shingle is chosen to match the pitch and the exposure the new deck gives.

Still stuck? We pick up 24/7.

If it's an emergency, call now. For non-urgent shingle roof replacement, send the form and we'll call you back.

Call (833) 751-2102Get a quote
Staunton city

Why shingle roof replacement is different in Shenandoah Valley

Shingle roofs on Staunton houses see the same two stresses as the rest of the valley: straight-line wind from summer storms and ice that follows snow in some winters. The nailing and the eave details are what carry a shingle roof through both.

On older Staunton houses with several roof planes, the shingle lines do not all run to one pattern. The crew sets the chalk lines on each plane separately, so the courses meet cleanly at the valleys and hips.

Related

Roof Replacement

A new roof on an older Staunton house, from the deck check through the ice barrier to the finished ridge.

Roof Repair

Local repairs to shingles, boots and flashing on Staunton roofs that are not yet due for replacement.

Ice Dam Prevention

Keeping snow melt from freezing at the eave of Staunton houses, with the barrier, the attic and the gutters checked together.

Metal Roofing

Standing seam and panel metal roofs for Staunton houses, including the review steps that apply in the historic districts.

Where we work

Shingle Roof Replacement across Staunton city

Not sure if you're covered? Check your ZIP code.

Guides

Read before you book

FAQ

Shingle Roof Replacement FAQs

How do I know which shingle the crew will use?

The scope names the product, the profile and the nail pattern, and the wrapper or the manufacturer's sheet is kept with the file. Ask the crew to show it before work starts.

Will a new shingle match an old one on the rest of the roof?

Only when the same product is still made. Older shingles are often discontinued, so a close match is the realistic target, and the technician says how it will read on each slope.

Is a shingle roof the right choice for every house?

Not automatically. Shingles suit most pitches and the common house shapes, but the deck, the eave and the historic-district rules for the address can point to a different covering. The visit decides that.

WhatsApp